Construction Chemicals

A. ADMIXTURES SYSTEM

1.) POWDER ADMIXTURES

Packed in 120 gram-sachet at a dosage rate of 1 pack per 40-kg bag of cement.

U-ChemPlast HRWR-PA

- it is a high-range water-reducing powder accelerator.

- a sulphonated-based dispersible powder admixture which gives higher early strength & accelerated curing time to concrete and masonry cement.

- meets the requirements of ASTM C494-Type F

U-ChemPlast PlasterMix

- a polymer modified high-range dispersible powder admixture best for your plastering works.

- a plasticizing agent, which helps improve the adhesion of mortar to any substrate and helps reduce the occurrence of hairline cracks.

- meets the requirements of ASTM C494-Type G

U-ChemPlast ChemTard-PR

- a water-reducing & retarding dispersible powder admixture.

- best for long hauling or which requires longer placement time of your concrete.

- increases workability and flowability of your concrete.

- meets the requirements of ASTM C494-Type D

2.) LIQUID ADMIXTURES

Available in 20-liter carbuoy and 210-liter steel drum at variable dosages normally at 0.70 – 1.20% on the weight of cementitious or binder materials.

U-ChemPlast HRWR-LA

- a high-range water-reducing liquid accelerator.

- a naphthalene sulphonated-based liquid admixture that gives higher early strength due to acceleration of strength development.

- meets the standards of ASTM C494-Type E & F

U-ChemPlast HRWR-LR

- a high-range water-reducing liquid admixture with retarding effect.

- a naphthalene sulphonated-based liquid admixture which also gives higher early strength but longer workability.

- meets the standards of ASTM C494-Type D & G

U-ChemPlast MRWR-LR

- a water-reducing liquid admixture with retarding effect.

- a naphthalene sulphonated-based liquid admixture which gives high quality concrete at normal conditions.

- best for pumpcrete design, hot weather concreting or mass concrete pours.

- meets the standards of ASTM C494-Type G

U-ChemPlast ChemTard-LR

- a water-reducing and retarding liquid admixure.

- a lignosulphonated-based liquid admixture which imparts to concrete longer water retention, thus extending workability to facilitate placement and finishing.

- meets the standards of ASTM C494-Type B & D

B. CONCRETE REPAIR

SuperBond CE-HR

A high-range epoxy based mortar intended for crack repairs, sealing of crevices, rebars & dowels (onto concrete), grouting of base plates and floor primers.

SuperBond SE-HR

High-Range Concrete Pile Splicing & Bonding Epoxy.

U-ChemShield RM

A polymer-modified repair mortar in powder form at 25-kg bag.

It sets faster than normal cement mortar and gives higher compressive strength and longer durability.

Best for use on spalled concrete, honeycombs, restoration of worn-out surfaces and filling of voids.

U-ChemShield Grout

A cementitious non-shrink grout in powder form at 25-kg bag.

A ready to use shrinkage compensated, natural aggregate cementitious grout for use in general civil engineering works.

U-ChemPlast GF-MR

A powder type admixture as a grout fluidifier designed to impart high fluidity to ordinary sand to cement grout mixtures while at the same time compensates mild shrinkage normally associated with site batched grouts.

C. FLOORING SYSTEM

1.) FLOOR HARDENERS

POWDER TYPE

U-ChemShield FH

- Dry shake aggregate (powder type) floor hardener.

- Designed to be broadcasted over freshly placed concrete.

- Available in different colors.

LIQUID TYPE

Kure-N-Harden

- A 4-in-1 formula, which acts as a hardener, sealer, dustproofer and a curing agent.

- Best for use over freshly placed and finished concrete or to refurbish old and aged concrete.

- Shines faster than any liquid hardener in the market today with continuous buffing.

- Withstands light to moderately heavy-duty traffic.

- Improves strength development.

- Contains no VOC, thus, it is environmentally friendly.

Lapidolith

- A concrete hardener and dustproofer that protects floor surfaces.

- Ideal for aged concrete surfaces.

- A non-film forming floor treatment, such it reacts 100% with free lime in concrete.

Sonosil

- A curing aid, hardening and dustproofing compound for concrete.

- Ideal for freshly placed & finished concrete for floors, walls, decks, docks and ramps.

- A sodium-silicate based compound and compatible with most resilient floor-covering adhesives and coatings.

2.) DEGADUR SYSTEM

A New Technology PolyMethylMethacrylate (PMMA) Resin Based Floor System.

Composed of a Primer, Base Coat, Top Coat, Selective High Grade Quartz Silica and High Quality Pigments.

Available in 3 systems: The Strong One, The Slip Resistant One and The Smooth One.

It is solvent free, cold curing and cure by means of polymerization.

Cures fast within 1-2 hours from application, thus, the system is made available for immediate loading (mechanically and chemically).

Cures in cold temperature (up to -30 o C).

Has very high elastic property.

Strong resistance against acids and caustics.

High resistance from light to heavy traffic.

D. WATERPROOFING SYSTEMS

SuperProof PM

A flexible type based on synthetic resins and polymer-modified cementitious materials.

A two-part, pre-packed system of liquid and powder forms.

An effective waterproofing system on a variety of substrates.

Suitable in contact with potable and sea water.

Radcon Formula No. 7

A sprayable type with an advanced chemical formulation that lasts a lifetime.

Suitable in contact with potable and sea water.